Removal And Installation: Notes

WARNING: This page is about a different car, the 2017 Mitsubishi Mirage. However, it is still accessible from the selected car via links, so may be relevant.

CAUTION:

The vehicle speed detection encoder collects any metallic particle easily, because it is magnetized. Make sure that the encoder should not collect any metallic particle. Check that there is not any trouble prior to assembling it.
The wiring harness for the wheel speed sensor should be routed without twisting.

Pre-removal and post-installation operation

Rear Scuff Plate Removal (Refer to INTERIOR TRIM ) <Rear wheel speed sensor>

Fig 1: Wheel Speed Sensor Components With Torque Specifications

Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.

NOTE: The encoder for detecting front wheel speed is a non-disassemble part integrated with the wheel bearing.