LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mitsubishi >> 2021 >> Outlander PHEV LE >> Repair and Diagnosis >> Accessories & Equipment >> Cruise Control Systems >> Cruise Control >> On-Vehicle Service >> Cruise Control Switch Check >> Cruise Control Setting
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Cruise Control Setting

  1. Turn on the power supply mode of the electric motor switch.
  2. Push the cruise control ON/OFF switch (cruise control display screen: display).
  3. Drive at the desired speed within the range of approximately 40 km/h (25 mph) or more.
  4. Push the SET - switch.
  5. Check to be sure that when the SET - switch is released the speed is the desired constant speed.
    NOTE: If the vehicle speed decreases to approximately 15 km/h (9.3 mph) below the set speed because of climbing a hill for example, it is normal for the cruise control to be cancelled. When the vehicle speed is decelerated to the low speed limit [approximately 40 km/h (25 mph)] or less, the constant speed driving will be cancelled even if the vehicle speed is not decelerated 15 km/h (9.3 mph) or more from the set speed.
    NOTE: On the high contrast meter, when SET - switch is pressed, "SET" will be displayed on the multi information display in the combination meter.
    G12376391Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.