LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mitsubishi >> 2021 >> Outlander PHEV LE >> Repair and Diagnosis >> External Pages >> Different car >> Section 83 (Cruise Control) >> On-Vehicle Service >> Cruise Control Switch Check >> Cruise Control Setting
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Cruise Control Setting

WARNING: This page is about a different car, the 2020 Mitsubishi Outlander PHEV. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn on the power supply mode of the electric motor switch.
  2. Push the cruise control ON/OFF switch (cruise control display screen: display).
  3. Drive at the desired speed within the range of approximately 40 km/h (25 mph) or more.
  4. Push the SET - switch.
  5. Check to be sure that when the SET - switch is released the speed is the desired constant speed.
    NOTE: If the vehicle speed decreases to approximately 15 km/h (9.3 mph) below the set speed because of climbing a hill for example, it is normal for the cruise control to be cancelled. When the vehicle speed is decelerated to the low speed limit approximately 40 km/h (25 mph) or less, the constant speed driving will be cancelled even if the vehicle speed is not decelerated 15 km/h (9.3 mph) or more from the set speed.
    NOTE: On the high contrast meter, when SET - switch is pressed, "SET" will be displayed on the multi information display in the combination meter.
    G12376391Courtesy of MIT
scientia non olet · About LEMON Manuals