LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mitsubishi >> 2021 >> Outlander PHEV LE >> Repair and Diagnosis >> External Pages >> Different car >> Section 83 (Cruise Control) >> On-Vehicle Service >> Cruise Control Switch Check >> Speed-Increase Setting
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Speed-Increase Setting

WARNING: This page is about a different car, the 2020 Mitsubishi Outlander PHEV. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn on the power supply mode of the electric motor switch.
  2. Push the cruise control ON/OFF switch (cruise control display screen: display).
  3. Set to the desired speed within the range of approximately 40 km/h (25 mph) or more.
  4. Push the RES + switch.
  5. Check to be sure that acceleration continues while the RES + switch is pushed, and that the speed at the time it was released becomes the constant driving speed.
    NOTE: Acceleration can be continued even if the vehicle speed has passed the high speed limit approximately 160 km/h (99.4 mph). But the constant driving speed when the RES + switch is released will be recorded as the high speed limit approximately 160 km/h (99.4 mph).
    G12376392Courtesy of MIT
scientia non olet · About LEMON Manuals