Removal And Installation: Notes

CAUTION:

When removing or installing the crankshaft position sensor, be careful not to apply impact to the sensor.
Do not reuse the crankshaft position sensor that has been dropped.

Pre-removal and Post-installation Operation

Fig 1: Removing/Installing Crankshaft Position Sensor Components Location With Torque Specification

Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.

Removal steps
<<A>>	• A/C compressor and clutch assembly (Refer to COMPRESSOR ASSEMBLY )
	1. Crankshaft position sensor connector
	2. Crankshaft position sensor
	3. O-ring