Removal And Installation: Notes

CAUTION: When the knock sensor is replaced, initialize the learned value using scan tool (M.U.T.-IIISE) (Refer to Precautions before Service, INITIALIZATION PROCEDURE FOR LEARNING VALUE IN DI AND MPI ENGINE ).

Pre-removal and Post-installation Operation

Inlet Manifold Removal and Installation (Refer to Inlet Manifold REMOVAL AND INSTALLATION ).

Fig 1: Removing/Installing Knock Sensor Components Location With Torque Specification

Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.

Removal
	1.	Knock sensor connector
>>A<<	2.	Knock sensor