LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 1996 >> 200SX SE-R, Automatic >> Repair and Diagnosis (Single Page) >> Engine Performance >> System >> Engine Controls - Basic Testing - 2.0L >> Ignition Checks >> Distributor Ignition >> Ignition Coil Power Source
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Ignition Coil Power Source

  1. Disconnect ignition coil 2-pin connector. Turn ignition on. Check for voltage at specified wire terminal. See IGNITION COIL POWER SOURCE TERMINAL IDENTIFICATION table.
  2. If voltage is present, go to POWER TRANSISTOR. If voltage is not present, check continuity of entire circuit between battery and ignition coil, including fusible link and ignition switch.
IGNITION COIL POWER SOURCE TERMINAL IDENTIFICATION

Application Wire Color
2.0L Black/Red
scientia non olet · About LEMON Manuals