LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2001 >> Maxima GLE, RE4F04W >> Repair and Diagnosis >> Brakes >> Traction Control >> Traction Control System >> On Board Diagnostic System Description >> Consult-II Inspection Procedure >> Data Monitor Mode
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Data Monitor Mode

DATA MONITOR MODE CHART

Monitor Item Condition Specification
FR RH SENSOR
FR LH SENSOR
RR RH SENSOR
RR LH SENSOR
Drive vehicle. (Each wheel is rotating.) Displays computed vehicle speed from wheel sensor signal.
Almost the same speed as speedometer.
STOP LAMP SW Turn ignition switch ON and depress brake pedal. Depress the pedal: ON
Release the pedal: OFF
ENGINE SPEED Engine is running. (RPM) Engine speed: 0 - 8,000 (RPM)
FR RH IN SOL
FR RH OUT SOL
FR LH IN SOL
FR LH OUT SOL
RR IN SOL
RR OUT SOL
RL IN SOL
RL OUT SOL
Ignition switch is turned ON or engine is running. Operating conditions for each solenoid valve are indicated.
ABS is not operating: OFF
ACTUATOR RLY Ignition switch is turned ON or engine is running. Displays ON/OFF condition of ABS actuator relay.
When turning ignition switch ON, ABS actuator relay is operated.
MOTOR RELAY ABS is not operating: OFF
ABS is operating: ON
WARNING LAMP Warning lamp is turned on: ON
Warning lamp is turned off: OFF
BATTERY VOLT Power supply voltage for control unit
THRTL OPENING The throttle valve opening rate (%) Opening rate: 0 - 100%
TRQ RDUC SIG The operating cylinder ratio to fuel injected, calculated and sent by ABS/TCS control unit to ECM, is displayed. TCS is not operating: 0
TCS is operating: 0 - 6*
*Displays the number of cylinders to which fuel supply is cut.
GEAR A/T gear position signal detected by TCM via ECM is displayed. Gear position: P, N: N.P
1st: 1
2nd: 2
3rd: 3
4th: 4
TCS SW ON/OFF condition of signal from TCS switch is displayed. TCS OFF S/W (all the time switch is pressed): ON
TCS OFF S/W (released): OFF
TCS OFF LAMP TCS OFF condition is displayed.
The condition of malfunctioning TCS is displayed.
TCS OFF indicator "OFF": OFF
TCS OFF indicator "ON": ON
SLIP LAMP The TCS functioning state is displayed by detecting rear wheel slip. SLIP indicator "ON": ON
SLIP indicator "OFF": OFF
TCS OPR SIG TCS operating condition TCS is not operating: OFF
TCS is operating: ON