AWD Models
WARNING: This page is about a different car, the 2005 Infiniti FX45 and 2005 Infiniti FX35. However, it is still accessible from the selected car via links, so may be relevant.
General Specifications Chart (AWD Models)
| Applied model | VQ35DE | VK45DE | ||
| Front | Propeller shaft model | 2S56A | ||
| Number of joints | 2 | |||
| Coupling method with transfer | Sleeve type | |||
| Coupling method with front final drive | Flange type | |||
| Shaft length (Spider to spider) | 763 mm (30.04 in) | |||
| Shaft outer diameter | 42.7 mm (1.68 in) | |||
| Rear | Propeller shaft model | 3F80A-1VL107 | ||
| Number of joints | 3 | |||
| Coupling method with transfer | Flange type | |||
| Coupling method with rear final drive | Rebro joint type | |||
| Shaft length | 1st (Spider to spider) | 399 mm (15.71 in) | ||
| 2nd (Spider to rebro joint center) | 753 mm (29.65 in) | |||
| Shaft outer diameter | 1st | 82.6 mm (3.25 in) | ||
| 2nd | 82.6 mm (3.25 in) | |||