LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2003 >> Altima Base, 2.5 A, Standard >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Self-Diagnostics >> Scan Tool Usage >> Generic Scan Tool (GST) >> GST Inspection Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

GST Inspection Procedure

  1. Turn ignition switch OFF.
  2. Connect GST to data link connector, which is located under left dash panel near the fuse box cover. See Figure.
  3. Turn ignition switch ON.
  4. Enter the program according to instruction on the screen or in the operation manual.
  5. Perform each diagnostic mode according to each service procedure. See Fig 1. For further information, see the GST operation manual of the tool maker.
Fig 1: Identifying Diagnostic Modes For GST
G00237164Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About LEMON Manuals