LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2003 >> Sentra SE-R, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 192 (Engine Controls - Self-Diagnostics) >> Diagnostic Tests >> DTC P0226: Accelerator Pedal Position Sensor Circuit Range/Performance Problem >> DTC Confirmation Test
April 5, 2026: LEMON Manuals is launched! Read the announcement.

DTC Confirmation Test

WARNING: This page is about a different car, the 2003 Infiniti G35. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: If a DTC confirmation test has been previously performed, turn ignition off and wait at least 10 seconds before performing next DTC confirmation test.
  1. Turn ignition switch on.
  2. Select DATA MONITOR mode with scan tool.
  3. Start engine and let it idle for one second.
  4. If 1st trip DTC is detected, go to DIAGNOSTIC PROCEDURE  . If 1st trip DTC is not detected, system is okay at this time.