LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2004 >> Armada LE, RWD >> Repair and Diagnosis >> Body & Frame >> Windows >> Power Window System >> Limit Switch Circuit Check Front RH
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Limit Switch Circuit Check Front RH

  1. CHECK FRONT POWER WINDOW AND DOOR LOCK/UNLOCK SWITCH RH LIMIT SIGNAL 
    1. Turn ignition switch ON.
    2. Check voltage between front power window motor RH connector D104 terminal 5 and ground.
    VOLTAGE REFERENCE CHART

    Connector Terminals (Wire color) Condition Voltage (V) (Approx.)
    (+) (-)
    D105 15(G/W) Ground Passenger side door window is between fully-open and just before fully-closed position (ON) 0
    Passenger side door window is between just before fully-closed position and fully-dosed position (OFF) 5

    OK or NG

    1. OK: Limit switch circuit is OK.
    2. NG: GO TO 2.
    Fig 1: Checking Voltage Between Front Power Window Motor RH And Ground
    G03496625Courtesy of NISSAN MOTOR CO., U.S.A.
  2. CHECK LIMIT SWITCH GROUND CIRCUIT 
    1. Turn ignition switch OFF.
    2. Disconnect front power window motor RH.
    3. Check continuity between front power window motor RH connector D104 terminal 6 and ground.
    1. 5 (G/W) - Ground: Approx. 5V 

    OK or NG

    1. OK: GO TO 3.
    2. NG: GO TO  5 .
    Fig 2: Checking Continuity Between Front Power Window Motor RH And Ground
    G03496626Courtesy of NISSAN MOTOR CO., U.S.A.
  3. CHECK LIMIT SWITCH GROUND CIRCUIT 
    1. Turn ignition switch OFF.
    2. Check continuity between front power window motor RH connector D104 terminal 6 and ground.
      1. 6 (W/B) - Ground: Continuity should exist. 

    OK or NG

    1. OK: Replace front power window motor RH.
    2. NG: GO TO 4.
    Fig 3: Checking Continuity Between Front Power Window Motor RH And Ground
    G03496627Courtesy of NISSAN MOTOR CO., U.S.A.
  4. CHECK HARNESS CONTINUITY 
    1. Disconnect front power window and door lock/unlock switch RH.
    2. Check continuity between front power window motor RH connector D104 terminal 6 and front power window and door lock/unlock switch RH connector D105 terminal 3.
    1. 6 (W/B) - 3 (W/B): Continuity should exist. 

    OK or NG

    OK:Replace front power window and door lock/unlock switch RH.

    NG: Repair or replace harness.

    Fig 4: Checking Continuity Between Front Power Window Motor And Front Power Window And Door Lock/Unlock Switch
    G03496628Courtesy of NISSAN MOTOR CO., U.S.A.
  5. CHECK HARNESS CONTINUITY 
    1. Turn ignition switch OFF.
    2. Disconnect front power window and door lock/unlock switch RH.
    3. Check continuity between front power window and door lock/unlock switch RH connector D105 terminal 15 and front power window motor RH connector D104 terminal 5.
    1. 15 (G/W) - 5 (G/W): Continuity should exist. 

    OK or NG

    1. OK:Replace front power window and door lock/unlock switch RH.
    2. NG: Repair or replace harness.
    Fig 5: Checking Continuity Between Front Power Window And Door Lock/Unlock Switch
    G03496629Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About LEMON Manuals