July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

ASCD Clutch Switch

Turn ignition switch OFF.
Disconnect ASCD clutch switch harness connector.
Check harness continuity between ASCD clutch switch terminals 1 and 2 under the following conditions.

Fig 1: Test Parameters
Courtesy of NISSAN MOTOR CO., U.S.A.

If NG, adjust ASCD clutch switch installation, refer to "CLUTCH PEDAL ", and perform step 3 again.

Fig 2: Checking Continuity
Courtesy of NISSAN MOTOR CO., U.S.A.