Without CONSULT-II

1. Turn ignition switch ON.
2. Check voltage between ECM terminal 108 and ground under the following conditions.

   A/T models 

   Fig 1: Test Parameters

   Courtesy of NISSAN MOTOR CO., U.S.A.

   M/T models 

   Fig 2: Test Parameters

   Courtesy of NISSAN MOTOR CO., U.S.A.
   Fig 3: Check voltage

   Courtesy of NISSAN MOTOR CO., U.S.A.

OK or NG 

1. OK: GO TO 2.
2. NG (M/T models): GO TO 3 .
3. NG (A/T models): GO TO 8 .