LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2004 >> Pathfinder LE, RWD >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System >> DTC P1121: Electric Throttle Control Actuator >> DTC Confirmation Procedure >> Procedure For Malfunction C >> With CONSULT-II
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

With CONSULT-II

  1. Turn ignition switch ON and wait at least 1 second.
  2. Select "DATA MONITOR" mode with CONSULT-II.
  3. Shift selector lever to D position (A/T) or 1st position (M/T), and wait at least 3 seconds.
  4. Shift selector lever to N or P position.
  5. Start engine and let it idle for 3 seconds.
  6. If DTC is detected, GO TO "DIAGNOSTIC PROCEDURE  " .
    Fig 1: Data Monitor Display
    G00780829Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About LEMON Manuals