With CONSULT-II
- Turn ignition switch OFF and wait at least 10 seconds.
- Turn ignition switch ON.
- Check "COOLAN TEMP/S" in "DATA MONITOR" mode with CONSULT-II.
- Confirm COOLAN TEMP/S value is 40°C (104°F) or less.
If the value is more than 40°C (104°F), park the vehicle in a cool place and retry from step 1.
- Start engine and wait until COOLAN TEMP/S value increases to more than 55°C (131°F).
If 1st trip DTC is detected, GO TO "DIAGNOSTIC PROCEDURE " .