"Multi Remote ENT"

1. Turn ignition switch OFF.
   Fig 1: Identifying Brake Pedal

   Courtesy of NISSAN MOTOR CO., U.S.A.
2. Connect "CONSULT-II" to the data link connector.
3. Turn ignition switch ON.
   Fig 2: Identifying Data Link Connector Display

   Courtesy of NISSAN MOTOR CO., U.S.A.
4. Touch "START".
5. Touch "SMART ENTRANCE".
   Fig 3: Identifying Smart Entrance Display

   Courtesy of NISSAN MOTOR CO., U.S.A.
6. Touch "MULTI REMOTE ENT".
   Fig 4: Identifying Multi Remote Ent Display

   Courtesy of NISSAN MOTOR CO., U.S.A.
7. Select diagnosis mode.

"DATA MONITOR", "ACTIVE TEST" and "WORK SUPPORT" are available.

Fig 5: Identifying Data Monitor" "Active Test" And "Work Support Display

Courtesy of NISSAN MOTOR CO., U.S.A.