LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2004 >> Sentra SE-R >> Repair and Diagnosis >> External Pages >> Different car >> Section 1110 (Engine Control System) >> DTC P1111, P1136: IVT Control Solenoid Valve >> DTC Confirmation Procedure >> With CONSULT-II
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

With CONSULT-II

WARNING: This page is about a different car, the 2004 Nissan Murano. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn ignition switch ON.
  2. Select "DATA MONITOR" mode with CONSULT-II.
  3. Start engine and let it idle for 5 seconds.
  4. If 1st trip DTC is detected, go to "DIAGNOSTIC PROCEDURE "
    Fig 1: DTC Confirmation Procedure With CONSULT-II (P1111, P1136)
    G00782655Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About LEMON Manuals