LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2004 >> Sentra SE-R >> Repair and Diagnosis >> External Pages >> Different car >> Section 1112 (Continuously Variable Transmission (CVT)) >> DTC P0841 Pressure Sensor Function >> DTC Confirmation Procedure >> With Consult-II
April 5, 2026: LEMON Manuals is launched! Read the announcement.

With Consult-II

WARNING: This page is about a different car, the 2004 Nissan Murano. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn ignition switch ON and select "DATA MONITOR" mode for "TRANSMISSION" with CONSULT-II.
  2. Start engine and maintain the following conditions for at least 12 consecutive seconds.

    VHCL SPEED: 40 km/h (25 MPH) More than 

    Selector lever: D position 

  3. If DTC is detected, go to "DIAGNOSTIC PROCEDURE ".
    Fig 1: DATA MONITOR - Consult II Display
    G00769723Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About LEMON Manuals