LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2004 >> Sentra SE-R >> Repair and Diagnosis >> External Pages >> Different car >> Section 1159 (Front Wiper And Washer) >> Front Wiper And Washer System >> Data Monitor >> Operation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Operation Procedure

WARNING: This page is about a different car, the 2004 Nissan Murano. However, it is still accessible from the selected car via links, so may be relevant.
  1. Touch "WIPER" on "SELECT TEST ITEM" screen.
  2. Touch "DATA MONITOR" on "SELECT DIAG MODE" screen.
  3. Touch either "ALL ITEMS" or "SELECT ITEM MENU" on "DATA MONITOR" screen.
    Fig 1: Data Monitor Operation Procedure Chart
    G00730745Courtesy of NISSAN MOTOR CO., U.S.A.
  4. Touch "START".
  5. When "SELECT ITEM MENU" is selected, touched items to be monitored. If "ALL ITEMS" is selected, all items will be monitored.
  6. Touch "RECORDING START" while monitoring to record the status of the item being monitored. To stop recording, touch "RECORDING STOP".


  1. Touch "DATA MONITOR" on "SELECT DIAG MODE" screen.
  2. Touch "ALL SIGNALS", "MAIN SIGNALS", "CANDIAG SUPPORT MNTR" or "SELECT FROM MENU" on the "DATA MONITOR" screen.
    Fig 1: Data Monitor Operation Procedure Chart
    G00730753Courtesy of NISSAN MOTOR CO., U.S.A.
  3. Touch "START".
  4. Touch the required monitoring item on "SELECT ITEM MENU". In "ALL SIGNALS", all items are monitored. In "MAIN SIGNALS", predetermined items are monitored.
  5. Touch "RECORD" while monitoring to record the status of the item being monitored. To stop recording, touch "STOP".
scientia non olet · About LEMON Manuals