Removal and Installation: Installation

WARNING: This page is about a different car, the 2005 Infiniti FX45 and 2005 Infiniti FX35. However, it is still accessible from the selected car via links, so may be relevant.

Installation is basically the reverse order of removal.

CAUTION:

Replace O-rings for A/C piping with new ones. Before installing, apply compressor oil to them.
Connection point for female-side piping is thin. So, when inserting male-side piping, take care not to deform female-side piping. Slowly insert in axial direction.
Insert one-touch joint connection point securely until it clicks.
After piping has been connected, pull male-side piping by hand to make sure piping does not come off.
When recharging refrigerant, check for leaks.