LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2004 >> Sentra SE-R >> Repair and Diagnosis >> External Pages >> Different car >> Section 1430 (Engine Control System) >> DTC P0605: ECM >> DIAGNOSTIC TROUBLE CODES Confirmation Procedure >> Procedure For Malfunction B >> With CONSULT-II
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

With CONSULT-II

WARNING: This page is about a different car, the 2005 Nissan 350Z. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn ignition switch ON and wait at least 1 second.
  2. Select "DATA MONITOR" mode with CONSULT-II.
  3. Turn ignition switch OFF, wait at least 10 seconds, and then turn ON.
  4. If 1st trip DTC is detected, go to "DIAGNOSTIC PROCEDURE "
    Fig 1: Scan Tool Display "Data Monitor Engine Speed"
    G02401752Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About LEMON Manuals