LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2004 >> Sentra SE-R >> Repair and Diagnosis >> External Pages >> Different car >> Section 2097 (Glass, Window System & Mirrors) >> Power Window System >> Limit Switch Circuit Check Front RH
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Limit Switch Circuit Check Front RH

WARNING: This page is about a different car, the 2008 Nissan Quest. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK POWER WINDOW AND DOOR LOCK/UNLOCK SWITCH RH LIMIT SIGNAL 
    1. Turn ignition switch ON.
    2. Check voltage between power window motor RH connector D105 terminal 15 and ground.
      TERMINAL VOLTAGE CONDITION CHART

      Connector Terminals Condition Voltage (V) (Approx.)
      (+) (-)
      D105 15 Ground Front door window RH is between fully-open and just before fully-closed position (ON) 0
      Front door window RH is between just before fully closed position and fully closed position (OFF) 5
      Fig 1: Checking Voltage Between Power Window Motor RH Connector D105 Terminal 15 And Ground
      G04902754Courtesy of NISSAN MOTOR CO., U.S.A.

    OK or NG 

    OK: Limit switch circuit is OK.

    NG: GO TO 2.

  2. CHECK LIMIT SWITCH GROUND CIRCUIT 
    1. Turn ignition switch OFF.
    2. Disconnect front power window motor RH.
    3. Check continuity between front power window motor RH connector D104 terminal 6 and ground.

      6 - Ground : Continuity should exist. 

    OK or NG 

    OK: Replace front power window motor RH. Refer to "REMOVAL AND INSTALLATION ".

    NG: GO TO 3.

    Fig 2: Checking Continuity Between Front Power Window Motor RH Connector D104 Terminal 4 And Ground
    G00465462Courtesy of NISSAN MOTOR CO., U.S.A.
  3. CHECK HARNESS CONTINUITY 
    1. Disconnect power window and door lock/unlock switch RH.
    2. Check continuity between power window and door lock/unlock switch RH connector and front power window motor RH connector.
      TERMINAL CONTINUITY REFERENCE CHART

      Connector Terminal Connector Terminal Continuity
      A B
      Power window and door lock/unlock switch RH: D105 3 Front power window motor RH: D104 6 Yes
    3. Check continuity between front power window motor RH connector and ground.
      TERMINAL CONTINUITY REFERENCE CHART

      Connector Terminal Ground Continuity
      B
      Front power window motor RH: D104 6 No
      Fig 3: Checking Continuity Between Power Window And Door Lock/Unlock Switch RH Connector Terminal 3 And Front Power Window Motor RH Connector Terminal 6, And Between Connector D104 Terminal 6 And Ground
      G00465464Courtesy of NISSAN MOTOR CO., U.S.A.

    OK or NG 

    OK: GO TO 4.

    NG: Repair or replace harness.

  4. CHECK HARNESS CONTINUITY 
    1. Check continuity between power window and door lock/unlock switch RH connector and front power window motor RH connector.
      TERMINAL CONTINUITY REFERENCE CHART

      Connector Terminal Connector Terminal Continuity
      A B
      Power window and door lock/unlock switch RH: D105 15 Front power window motor RH: D104 5 Yes
    2. Check continuity between front power window motor RH connector and ground.
      TERMINAL CONTINUITY REFERENCE CHART

      Connector Terminal Ground Continuity
      B
      Front power window motor RH: D104 5 No
      Fig 4: Checking Continuity Between Power Window And Door Lock/Unlock Switch RH Connector Terminal 15 And Front Power Window Motor RH Connector Terminal 5, And Between Connector D104 Terminal 5 And Ground
      G00465465Courtesy of NISSAN MOTOR CO., U.S.A.

    OK or NG 

    OK: GO TO 5.

    NG: Repair or replace harness.

  5. CHECK LIMIT SWITCH GROUND 

    Check continuity between power window and door lock/unlock switch RH connector and ground.

    TERMINAL CONTINUITY REFERENCE CHART

    Connector Terminal Ground Continuity
    Power window door lock/unlock switch RH: D105 3 Yes
    Fig 5: Checking Continuity Between Power Window And Door Lock/Unlock Switch RH Connector Terminal 3 And Ground
    G04907448Courtesy of NISSAN MOTOR CO., U.S.A.

    OK or NG 

    OK: GO TO  7.

    NG: GO TO 6.

  6. CHECK POWER WINDOW AND DOOR LOCK/UNLOCK SWITCH RH GROUND CIRCUIT 

    Check continuity between power window and door lock/unlock switch RH connector D105 terminal 11 and ground.

    11 - Ground : Continuity should exist. 

    OK or NG 

    OK: Replace power window and door lock/unlock switch RH. Refer to "FRONT DOOR ".

    NG: Repair or replace harness.

    Fig 6: Checking Continuity Between Power Window And Door Lock/Unlock Switch RH Connector D105 Terminal 11 And Ground
    G04902742Courtesy of NISSAN MOTOR CO., U.S.A.
  7. CHECK FRONT POWER WINDOW MOTOR RH LIMIT SIGNAL 
    1. Connect power window and door lock/unlock switch RH and front power window motor RH.
    2. Turn ignition switch ON.
    3. Check voltage between power window and door lock/unlock switch RH connector.
      TERMINAL VOLTAGE CONDITION CHART

      Connector Terminals Condition Voltage (V) (Approx.)
      (+) (-)
      Power window and door lock/unlock switch RH: D105 15 3 Front door window RH is between fully-open and just before fully-closed position (ON) 0
      Front door window RH is between just before fully closed position and fully closed position (OFF) 5
      Fig 7: Checking Voltage Between Door Lock/Unlock Switch Connector Terminals 3 And 15
      G04907450Courtesy of NISSAN MOTOR CO., U.S.A.

    OK or NG 

    OK: Check the condition of the harness and connector.

    NG: Replace front power window motor RH. Refer to "REMOVAL AND INSTALLATION ".

scientia non olet · About LEMON Manuals