System Description: Notes

WARNING: This page is about a different car, the 2008 Nissan Quest. However, it is still accessible from the selected car via links, so may be relevant.

Power is supplied at all times

from 50A fusible link (letter j, located in the fuse and fusible link box)
to BCM terminal 70
through BCM terminal 69
to main power window and door lock/unlock switch terminal 1 (without rear power vent windows) or 19 (with rear power vent windows)
to power window and door lock/unlock switch RH terminal 10.

With ignition switch in ON or START position, power is supplied

through 10A fuse [No. 16, located in the fuse block (J/B)]
to BCM terminal 38
through BCM terminal 68
to main power window and door lock/unlock switch terminal 10.

With ignition switch in ACC or ON position, power is supplied

through 10A fuse [No. 4, located in the fuse block (J/B)]
to BCM terminal 11.

Ground is supplied

to BCM terminal 67
to front door lock assembly LH (key cylinder switch) terminal 5
to main power window and door lock/unlock switch terminal 15 (without rear power vent windows) or 17 (with rear power vent windows)
to power window and door lock/unlock switch RH terminal 11
through body grounds M57, M61 and M79.