Lighting Switch Inspection

WARNING: This page is about a different car, the 2005 Infiniti G35. However, it is still accessible from the selected car via links, so may be relevant.

CHECK LIGHTING SWITCH INPUT SIGNAL
With CONSULT-II

Select "BCM" on CONSULT-II. With "HEAD LAMP" data monitor, make sure "AUTO LIGHT SW" turns ON-OFF linked with operation of lighting switch.
1. When lighting switch is AUTO: AUTO LIGHT SW ON position
Without CONSULT-II

Refer to COMBINATION SWITCH INSPECTION .

OK or NG
1. OK: INSPECTION END
2. NG: Check combination switch (lighting switch). Refer to COMBINATION SWITCH INSPECTION .
Fig 1: Data Monitor Display
Courtesy of NISSAN MOTOR CO., U.S.A.