Refrigerant Lines: Compressor: Installation

WARNING: This page is about a different car, the 2003 Infiniti M45. However, it is still accessible from the selected car via links, so may be relevant.

Installation is basically the reverse order of removal.

CAUTION:

Replace low-pressure flexible hose and high-pressure flexible hose O-rings with new ones. Apply compressor oil prior to installation.
When pouring refrigerant, check for leaks.
1. Bolts mounting the compressor
2. Tightening torque : 57 - 65 N. m (5.8 - 6.7 kg.m, 42 - 48 ft-lb)
3. Bolts mounting the compressor bracket
4. Tightening torque : 57 - 65 N.m (5.8 - 6.7 kg.m, 43 - 48 ft-lb)
5. Nut mounting the high-pressure flexible hose
6. Tightening torque : 7.8 - 19.6 N.m (0.8 - 1.9 kg.m, 69 - 173 in-lb)
7. Nut mounting the low-pressure flexible hose
8. Tightening torque : 7.8 - 19.6 N.m (0.8 - 1.9 kg.m, 69 - 173 in-lb)