LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2004 >> Sentra SE-R >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 5 (Clutch System - RS5F70A) >> Operating Cylinder >> Assembly
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Operating Cylinder: Assembly

WARNING: This page is about a different variant/trim than selected.
CAUTION: To assemble the operating cylinder use the specified rubber grease and rubber lubricant. Refer to RECOMMENDED CHEMICAL PRODUCTS AND SEALANTS .
  1. Apply rubber lubricant to the overall inside surface of the operating cylinder body.
  2. Install the air bleeder, tighten to specification.

    Air bleeder: 6 -10 N-m (0.6 -1.0 kg-m, 52 - 87 in-lb) 

  3. Install the piston spring with the tapered spring end pointing toward the piston cup.
  4. Apply rubber grease and install the piston cup.
  5. Apply rubber grease and install the piston.
  6. Install the push rod.
  7. Apply rubber grease and install the dust cover.
scientia non olet · About LEMON Manuals