Active Test
Operation procedure
- Touch "DOOR LOCK" on the "SELECT TEST ITEM" screen.
- Touch "ACTIVE TEST" on the "SELECT DIAG MODE" screen.
- Touch the item to be tested, and check the operation.
- During the operation check, touching "OFF" deactivates the operation.DISPLAY ITEM LIST
Test item Content ALL D/LK MTR This test is able to check all door lock actuators lock operation. These actuators lock when "ON" on CONSULT-II screen is touched. DR D/UN MTR This test is able to check front door lock assembly LH (actuator) unlock operation. These actuators lock when "ON" on CONSULT-II screen is touched. NON DR D/UN This test is able to check door lock actuators [except front door lock assembly LH (actuator)] unlock operation. These actuators unlock when "ON" on CONSULT-II screen is touched.