Data Monitor
Operation procedure
- Touch "DOOR LOCK" on the "SELECT TEST ITEM" screen.
- Touch "DATA MONITOR" on the "SELECT DIAG MODE" screen.
- Touch either "ALL SIGNALS" or "SELECTION FROM MENU" on the "DATA MONITOR" screen.OPERATION PROCEDURE
ALL SIGNALS Monitor all items. SELECTION FROM MENU Select and monitor the item. - Touch "START".
- If "SELECTION FROM MENU" is selected, touch the desired monitor item. If "ALL SIGNALS" is selected, all the items are monitored.
- During monitoring, touching "COPY" can start recording the monitor item status.
DISPLAY ITEM LIST
| Monitor item "OPERATION" | Content | |
|---|---|---|
| IGN ON SW | "ON/OFF" | Indicates [ON/OFF] condition of ignition switch. |
| KEY ON SW | "ON/OFF" | Indicates [ON/OFF] condition of ignition switch. |
| CDL LOCK SW | "ON/OFF" | Indicates [ON/OFF] condition of key lock signal from lock/unlock switch LH and RH. |
| CDL UNLOCK SW | "ON/OFF" | Indicates [ON/OFF] condition of unlock signal from lock/unlock switch LH and RH. |
| KEY CYL LK-SW | "ON/OFF" | Indicates [ON/OFF] condition of lock signal from key cylinder. |
| KEY CYL UN-SW | "ON/OFF" | Indicates [ON/OFF] condition of unlock signal from key cylinder. |
| DOOR SW-DR | "ON/OFF" | Indicates [ON/OFF] condition of front door switch LH. |
| DOOR SW-AS | "ON/OFF" | Indicates [ON/OFF] condition of front door switch RH. |
| DOOR SW-RR | "ON/OFF" | Indicates [ON/OFF] condition of rear door switch RH. |
| DOOR SW-RL | "ON/OFF" | Indicates [ON/OFF] condition of rear door switch LH. |