LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2005 >> Armada LE, 4WD >> Repair and Diagnosis >> Engine Performance >> Engine Control System >> DTC P1572: ASCD Brake Switch >> DTC confirmation Procedure >> With Consult-II
April 5, 2026: LEMON Manuals is launched! Read the announcement.

With Consult-II

  1. Start engine (VDC switch OFF).
  2. Select "DATA MONITOR" mode with CONSULT-II.
  3. Press MAIN switch and make sure that CRUISE indicator lights up.
  4. Drive the vehicle for at least 5 consecutive seconds under the following condition.
    VHCL SPEED SPECIFICATION

    VHCL SPEED SE More than 30 km/h (19 MPH)
    Selector lever Suitable position

    If DTC is detected, go to DIAGNOSTIC PROCEDURE .

    If DTC is not detected, go to the following step.

    Fig 1: CONSULT-II Display - "DATA MONITOR" Mode
    G02444107Courtesy of NISSAN MOTOR CO., U.S.A.
  5. Drive the vehicle for at least 5 consecutive seconds under the following condition.
    VHCL SPEED SPECIFICATION

    VHCL SPEED SE More than 30 km/h (19 MPH)
    Selector lever Suitable position
    Driving location Depress the brake pedal for more than five seconds so as not to come off from the above-mentioned condition.
  6. If DTC is detected, go to DIAGNOSTIC PROCEDURE .
scientia non olet · About LEMON Manuals