Consult-II Main Function
In a diagnosis function (main function), there are "SELF-DIAGNOSTIC RESULTS", "DATA MONITOR", "CAN DIAG SUPPORT MNTR", "ACTIVE TEST", "FUNCTION TEST", "ECU PART NUMBER".
CONSULT-II MAIN FUNCTION
| Diagnostic test mode | Function | Reference |
|---|---|---|
| SELF-DIAGNOSTIC RESULTS | Self-diagnostic results can be read and erased quickly. | , "SELF-DIAGNOSIS" |
| DATA MONITOR | Input/Output data in the ABS actuator and electric unit (control unit) can be read. | "DATA MONITOR " |
| CAN DIAG SUPPORT MNTR | The results of transmit/receive diagnosis of communication can be read. | - |
| ACTIVE TEST | Diagnostic Test Mode in which CONSULT-II drives some actuators apart from the ABS actuator and electric unit (control unit) and also shifts some parameters in a specified range. | "ACTIVE TEST " |
| FUNCTION TEST | Performed by CONSULT-II instead of a technician to determine whether each system is "OK" or "NG". | - |
| ECU PART NUMBER | ABS actuator and electric unit (control unit) part number can be read. | - |