LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2005 >> Sentra SE-R >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System - DTCS P1143 To P2138 (Qr25DE) >> DTC P1572: ASCD Brake Switch >> Component Inspection >> ASCD Brake Switch
April 5, 2026: LEMON Manuals is launched! Read the announcement.

ASCD Brake Switch

  1. Turn ignition switch OFF.
  2. Disconnect ASCD brake switch harness connector.
  3. Check harness continuity between ASCD brake switch terminals 1 and 2 under the following conditions.
    Fig 1: Checking Continuity Between ASCD Brake Switch Terminals 1 And 2
    G02454186Courtesy of NISSAN MOTOR CO., U.S.A.
    BRAKE PEDAL CONDITION AND CONTINUITY REFERENCE

    Condition Continuity
    Brake pedal: Fully released. Should exist.
    Brake pedal: Slightly depressed. Should not exist.
    1. If NG, adjust ASCD brake switch installation. Refer to BRAKE PEDAL AND BRACKET . Perform step 3 again.