LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2006 >> Maxima SL >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System - DTCS P1211 To P2A03 >> DTC P1572 ASCD Brake Switch >> Component Inspection >> ASCD Brake Switch
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

ASCD Brake Switch

  1. Turn ignition switch OFF.
  2. Disconnect ASCD brake switch harness connector.
  3. Check continuity between ASCD brake switch terminals 1 and 2 under the following conditions.
Fig 1: Checking Harness Continuity Between ASCD Brake Switch Terminals 1 And 2
G04101963Courtesy of NISSAN MOTOR CO., U.S.A.
CONTINUITY REFERENCE

Condition Continuity
Brake pedal: Fully released Should exist
Brake pedal: Slightly depressed Should not exist

If NG, adjust ASCD brake switch installation, refer to "BRAKE PEDAL ", and perform step 3 again.

scientia non olet · About LEMON Manuals