LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2006 >> Maxima SL >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System - DTCS P1211 To P2A03 >> DTC P2100, P2103 Throttle Control Motor Relay >> DTC Confirmation Procedure >> Procedure For DTC P2100 >> With CONSULT-II
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

With CONSULT-II

  1. Turn ignition switch ON and wait at least 2 seconds.
  2. Select "DATA MONITOR""mode with CONSULT-II.
  3. Start engine and let it idle for 5 seconds.
  4. If DTC is detected, go to "DIAGNOSTIC PROCEDURE ".
Fig 1: Consult-II DATA MONITOR Display Screen
G04080353Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About LEMON Manuals