LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2006 >> Murano SL, AWD >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System - DTCS P0451 To P1212 >> DTC P0451 EVAP Control System Pressure Sensor >> DTC Confirmation Procedure >> With Consult-II
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

With Consult-II

  1. Turn ignition switch OFF and wait at least 10 seconds.
  2. Turn ignition switch ON and select "DATA MONITOR" mode with CONSULT-II.
  3. Start engine and wait at least 40 seconds.

    If 1st trip DTC is detected, go to "DIAGNOSTIC PROCEDURE "

    Fig 1: Consult-II DATA MONITOR Display Screen
    G04074999Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About LEMON Manuals