LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2006 >> Sentra SE-R Spec V >> Repair and Diagnosis >> Brakes >> Traction Control >> Brake Control System >> Removal And Installation >> Removal and Installation >> Actuator >> Installation
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Removal and Installation: Actuator: Installation

  1. Connect brake lines temporarily.
  2. Tighten bolts.
  3. Tighten brake lines.
  4. Connect harness connector and negative battery cable.
  5. Install strut tower bar (if equipped). Refer to "COMPONENTS ".
  6. Refill and bleed the brake fluid. Then bleed air. Refer to "BLEEDING BRAKE SYSTEM ".
  7. Install the A/C high p ressure and A/C low pressure lines. Evacuate and recharge the A/C system. Refer to "EVACUATING SYSTEM AND CHARGING REFRIGERANT ".
scientia non olet · About LEMON Manuals