LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2007 >> Sentra SE-R >> Repair and Diagnosis >> External Pages >> Different car >> Section 13 (Front Axle) >> Drive Shaft >> Assembly >> Support Bearing
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Support Bearing

WARNING: This page is about a different car, the 2006 Nissan Sentra. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install bearing into retainer.
    Fig 1: Installing Bearing Into Retainer
    G04194465Courtesy of NISSAN MOTOR CO., U.S.A.
  2. Install dust shield.
  3. Install snap ring.
  4. Press drive shaft into bearing.
    Fig 2: Pressing Drive Shaft Into Bearing
    G04194466Courtesy of NISSAN MOTOR CO., U.S.A.
  5. Install snap ring.
  6. Install new dust shield.
    Fig 3: Installing Snap Ring
    G04194467Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About LEMON Manuals