LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2007 >> Sentra SE-R >> Repair and Diagnosis >> External Pages >> Different car >> Section 13 (Front Axle) >> Drive Shaft >> Disassembly >> Support Bearing
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Support Bearing

WARNING: This page is about a different car, the 2006 Nissan Sentra. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove dust shield.
    Fig 1: Removing Dust Shield
    G04194460Courtesy of NISSAN MOTOR CO., U.S.A.
  2. Remove snap ring.
    Fig 2: Removing Snap Ring
    G04194461Courtesy of NISSAN MOTOR CO., U.S.A.
  3. Press support bearing assembly off drive shaft.
    Fig 3: Pressing Support Bearing Assembly Off Drive Shaft
    G04194462Courtesy of NISSAN MOTOR CO., U.S.A.
  4. Remove snap ring.
  5. Remove dust shield.
  6. Separate support bearing from retainer.
    Fig 4: Removing Dust Shield
    G04194463Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About LEMON Manuals