Procedure For DTC P0103

With CONSULT-II 

1. Turn ignition switch ON.
2. Select "DATA MONITOR" mode with CONSULT-II.
3. Wait at least 5 seconds.
4. If DTC is detected, go to "DIAGNOSTIC PROCEDURE ".

   If DTC is not detected, go to next step.

5. Start engine and wait at least 5 seconds.
6. If DTC is detected, go to "DIAGNOSTIC PROCEDURE ".

Fig 1: Screen Display - Data Monitor

Courtesy of NISSAN MOTOR CO., U.S.A.

With GST 

Follow the procedure "With CONSULT-II" above.