LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2008 >> Frontier XE >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System (Qr25DE) >> Component Diagnosis >> ASCD Brake Switch >> Component Inspection >> ASCD Clutch Switch
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

ASCD Clutch Switch

  1. Turn ignition switch OFF.
  2. Disconnect ASCD clutch switch harness connector.
  3. Check continuity between ASCD clutch switch terminals 1 and 2 under the following conditions.
    CONTINUITY REFERENCE

    Condition Continuity
    Clutch pedal: Fully released Should exist
    Clutch pedal: Slightly depressed Should not exist
    Fig 1: Checking Continuity Between ASCD Clutch Switch Terminals 1 And 2
    G04875415Courtesy of NISSAN MOTOR CO., U.S.A.

    If NG, adjust ASCD clutch switch installation, refer to "ON-VEHICLE INSPECTION AND ADJUSTMENT ", and perform step  3 again.

scientia non olet · About LEMON Manuals