LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2008 >> Frontier XE >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System (Qr25DE) >> Component Diagnosis >> P0462, P0463 Fuel Level Sensor >> DTC Confirmation Procedure
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

DTC Confirmation Procedure

NOTE: If DTC Confirmation Procedure has been previously conducted, always turn ignition switch OFF and wait at least 10 seconds before conducting the next test.

TESTING CONDITION: 

Before performing the following procedure, confirm that battery voltage is more than 11V at ignition switch ON  .

With CONSULT-III

  1. Turn ignition switch ON.
  2. Wait at least 5 seconds.
  3. Check 1st trip DTC.
  4. If 1st trip DTC is detected, go to "DIAGNOSIS PROCEDURE ".

With GST

Follow the procedure "WITH CONSULT-III" above.

scientia non olet · About LEMON Manuals