VIAS Control Solenoid Valve

With CONSULT-III 

1. Reconnect all harness connectors disconnected.
2. Turn ignition switch ON.
3. Perform "VIAS SOL VALVE" in "ACTIVE TEST" mode.
4. Check air passage continuity and operation delay time under the following conditions.
   AIR PASSAGE CONTINUITY CHART
   
   

   Condition VIAS SOL VALVE	Air passage continuity between A and B	Air passage continuity between A and C
   ON	Yes	No
   OFF	No	Yes

   Operation takes less than 1 second  .

   Fig 1: CONSULT-III Display - Active Test

   Courtesy of NISSAN MOTOR CO., U.S.A.

With GST 

Check air passage continuity and operation delay time under the following conditions.

Operation takes less than 1 second  .

Fig 2: Checking Air Passage Continuity And Operation Delay Time

Courtesy of NISSAN MOTOR CO., U.S.A.