LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2008 >> Quest Base >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System - DTCS U1000 Through P0153 >> DTC P0102, P0103 MAF Sensor >> DTC Confirmation Procedure >> Procedure For DTC P0102 >> With CONSULT-III
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

With CONSULT-III

  1. Turn ignition switch ON.
  2. Select "DATA MONITOR" mode with CONSULT-III.
  3. Start engine and wait at least 5 seconds.
  4. If DTC is detected, go to "DIAGNOSTIC PROCEDURE ".
scientia non olet · About LEMON Manuals