April 5, 2026: LEMON Manuals is launched! Read the announcement.

Component Function Check

PERFORM COMPONENT FUNCTION CHECK FOR MALFUNCTION B

With CONSULT-III

Turn ignition switch ON.
Select "CPP SW" and "CLUTCH INTLCK SW" in "DATA MONITOR" mode with CONSULT-III.
Check "CPP SW" and "CLUTCH INTLCK SW" indication under the following conditions.

MONITOR ITEM CONDITION CHART

Monitor item	Condition		Indication
CPP SW	Clutch pedal	Fully released	ON
CPP SW		Fully depressed	OFF
CLUTCH INTLCK SW		Fully released	OFF
CLUTCH INTLCK SW		Fully depressed	ON

Without CONSULT-III

Turn ignition switch ON.
Check the voltage between ECM harness connector terminals under the following conditions.

VOLTAGE SPECIFICATION

ECM				Condition		Voltage (V)
+		-
Connector	Terminal	Connector	Terminal
F101	41 Clutch pedal position switch signal)	M107	128	Clutch pedal	Fully released	Approx. 0
	41 Clutch pedal position switch signal)				Fully depressed	Battery voltage
	42 (Clutch interlock switch signal)				Fully released	Approx. 0
	42 (Clutch interlock switch signal)				Fully depressed	Battery voltage

Is the inspection result normal?

YES: INSPECTION END

NO: Go to "DIAGNOSIS PROCEDURE ".