LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2010 >> 370Z Base, 2D Convertible, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 48 (Audio System, Visual System, Navigation System) >> BOSE Audio With Navigation >> Function Diagnosis >> Navigation System >> Component Description
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Component Description

WARNING: This page is about a different car, the 2009 Nissan 370Z. However, it is still accessible from the selected car via links, so may be relevant.
COMPONENT DESCRIPTION

Part name Description
AV CONTROL UNIT
  • It is the master unit that controls each operation of the navigation system.
  • The HDD (Hard Disk Drive) is built in, and the map data is stored in HDD.
  • The RGB image signal (map information) is output to the front display unit.
  • The voice guidance signal is output to the BOSE amp.
FRONT DISPLAY UNIT
  • Map image signal is input from AV control unit, and it is indicated on the display.
  • Each operation of navigation can be performed by the touch panel function.
BOSE AMP. Voice guidance signal is input from AV control unit, and it is output to front LH/RH speakers.
FRONT DOOR SPEAKER Voice guidance signal from BOSE amp. is output.
FRONT SQUAWKER
MULTIFUNCTION SWITCH
  • Each operation of navigation can be performed.
  • The multifunction switch is connected to the preset switch by wiring harness, and it transmits the operation signal to the preset switch.
PRESET SWITCH
  • Operation panel is equipped with the centralized switch where audio and air conditioner operations are integrated.
  • The preset switch is connected via AV communication, and it transmits the operation signals of the preset switch and multifunction switch.
  • The disk ejection operating signal is performed by wiring harness.
STEERING SWITCH
  • Each operation of navigation, etc. can be performed.
  • Switch operating signal is output to AV control unit.
MICROPHONE
  • Used for hands-free phone operation and voice recognition.
  • Mic. signal is transmitted to AV control unit.
  • Power (Mic. power supply) is supplied from AV control unit.
GPS ANTENNA GPS signal is received and is output to AV control unit.