July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Av Communication System

Solder the repaired parts, and wrap with tape. [Frays of twisted line must be within 110 mm (4.33 in).]

Fig 1: Identifying Soldered Parts Wrapped With Tape
Courtesy of NISSAN MOTOR CO., U.S.A.
Do not perform bypass wire connections for the repair parts. (The spliced wire will become separated and the characteristics of twisted line will be lost.)

Fig 2: Identifying Bypass Wire Connection
Courtesy of NISSAN MOTOR CO., U.S.A.