System Initialization: Description

WARNING: This page is about a different variant/trim than selected.

If any of the following operations are performed, the initialization is necessary for normal operation of power window system.

Disconnection and connection of battery cable from negative terminal.
When power window main switch or front power window switch (passenger side) replaced.
Electric power supply to power window main switch or front power window switch (passenger side) or power window motor (driver side/passenger side) is interrupted by blown fuse or disconnection and connection of the negative terminal of battery, etc.
Disconnection and connection of power window main switch or front power window switch (passenger side) harness connector.
Removal of power window motor (driver side/passenger side) from module assembly.
Operation of module assembly as an independent unit.
Removal of regulator assembly from module assembly.
Removal and installation of glass.
Removal and installation of weather-strip.
Removal and installation of door glass run.

CAUTION: The following specified operations can not be performed under the non-initialized condition.