LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2012 >> Altima Base >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System (Introduction) (Qr25DE For CALIFORNIA) >> System Description >> Diagnosis System (ECM) >> On Board Diagnosis Function >> SRT Status Mode >> Operation Procedure
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Operation Procedure

  1. Turn ignition switch ON and wait 20 seconds.
  2. SRT status is indicated as shown below in figure.
    • ECM continues to illuminate MIL if all SRT codes are set.
    • ECM blinks MIL for about 10 seconds if all SRT codes are not set.
Fig 1: SRT Status Blinking Pattern (All SRT Codes Set/Not Set)
G05880995Courtesy of NISSAN NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals