Accelerator Pedal Module Removal/Installation

WARNING: This page is about a different car, the 2013 Acura MDX, 2012 Acura MDX, 2011 Acura MDX, and 2010 Acura MDX. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect the APP sensor 6P connector (A).

Fig 1: Accelerator Pedal Module With Torque Specifications
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Remove the accelerator pedal module (B).
NOTE: The APP sensor is not available separately. Do not disassemble the accelerator pedal module.
Install the parts in the reverse order of removal.