Using the HDS

WARNING: This page is about a different car, the 2013 Acura MDX, 2012 Acura MDX, 2011 Acura MDX, and 2010 Acura MDX. However, it is still accessible from the selected car via links, so may be relevant.

Connect the HDS to the data link connector.
Turn the ignition switch to ON (II), then enter the vehicle's VIN and mileage at the prompts.
Select BODY ELECTRICAL from the SYSTEM SELECTION MENU.
From the BODY ELECTRICAL SYSTEM SELECT menu, select POWER WINDOWS.
From the MODE menu, select ADJUSTMENT.
From the ADJUSTMENT MENU, select POWER WINDOW RESET FOR DRIVER SIDE (PASSENGER'S SIDE).
Follow the prompts on the screen.
Confirm that the power window control unit is reset by using the power window AUTO UP and AUTO DOWN function.